Repareer je spullen Gemeenschap Winkel

Een gameconsole voor de televisie, geproduceerd door Sony Computer Entertainment, ook bekend als de PS4. Voor het eerst aangekondigd op 20 februari 2013 en gelanceerd op 15 november, 2013.

1695 Vragen Bekijk alle

Opties

My disc drive is not present!

I recently performed a hdd swap and I was tearing down the rest for cleaning. I put everything back together and now my disc drive is not working at all. The button makes no sound at all! Please help

Update (06/27/2016)

I think I may have found the issue. The ribbon cable. I believe I pulled it out incorrectly causing the ears to tear off of the end. There might be damage to the connect on the circuit board of the drive. I'm not completely sure. Does this sound like a possibility???

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

It's not the power supply. That ribbon cable that you commented about is your problem. This happens all the time. I see it every week in my shop. That ribbon cable with the ears that are torn off is not going into the connectors all the way and/or it also may be going in crooked. If those little ears have been torn off and stuck inside the connectors that would be what's causing it to not go in all the way.

So, now the hard part...getting those little ears out. I use a dental pick that's been filed down to fit inside the connectors. Sometimes you can do it without removing the motherboard, but many times you need to take the motherboard out to get a good angle on it.

Another option that might work is to get a new ribbon cable, cut those little ears off, insert it into the connector and then tape it there once it's where it needs to be.

Hope this helps, good luck!

Was dit antwoord nuttig?

Ja Nee
Score 1

2 opmerkingen:

Ok so I'll try that later on. Another thing. So when I did the tear down I accidentally left the disc in. I figured out how to manually eject the disc. Not its saying disc unrecognizable. Would this be an issue associated with the ribbon cable connector ear also??

door

Yes, this could be an issue with the ribbon cable. It could be a laser problem or something else wrong with the drive...but since we know the ribbon cable is bad there's no reason to try to figure anything else out without fixing that first.

door

Voeg een opmerking toe

Opties

If you teared down then reassembled with caution (I mean without applying force), you problably forgot something, or done something wrong, most likely with the PSU (power supply).

If you have no beep at all, the +5V is missing. It is provided by the small 4 or 5 wire cable between the motherboard and the PSU.

Check and report :-)

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

devon meekins zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 113