Ga door naar hoofdinhoud

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Vragen Bekijk alle

Screen not properly working after replacement

Hello Peeps!

I replaced my cracked screen 2 days ago (was not my first 5s screen replacement) and it worked fine for about 1 1/2 hour.

Suddenly the screen went black and when pressing home or power button the screen only slightly lights up (reaaaaally slightly).

Checked if all cables are connected properly and did all software stuff i know about!

iPhone is clearly on as it vibrates when connected to the charger or when switching the mute/unmute button!

Any suggestions or anyone had the same problem who found a solution?

Thanks in advance!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
1 Opmerking

Did you hard reset? Try pulling and replugging battery if that doesn't work.

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Not a software fault, definitely hardware. Sounds like you may have caused more damage when you replaced the screen yourself.

If you know anything about board repairs, id check the backlight circuit on the board.

If you don't, take it to someone who can do micro board level repairs.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Moritz zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 77