Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2683 Vragen Bekijk alle

How Can I Remove Stripped Screws from the Edge of 6s Screen?

Hello,

I am replacing the screen on a previosuly water damaged 6s that I have thoroughly cleaned out, and I cannot get the screws off the back plate of the screen, apart from 2... 4 are rusted in. What can I do to get them out? Thanks...

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Are they the holding the backing plate on the sides of the screen? only option is to use a screw extractor or drill them out then replace

Was dit antwoord nuttig?

Score 0

4 opmerkingen:

You can also possibly try a torx bit as well or a flathead, I managed to get a stripped logic board screw out by using the torx bit you would usually use on the bottom screws

door

Thanks, where can I fix screw extractors small enough for an iphone? heh

door

Hello? Id like to know where I can find them I honestly ant find anything...

door

Just drill them out with a drill bit as big as the head of the screw

door

Voeg een opmerking toe

Voeg je antwoord toe

ZsTech zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 119