I replaced the screen and battery and ninth in is happening.I put it on charge for a hours and in tried starting it by holding the home button and the power button Iand nothin then tried starting by just the power button and nothing.both screen and battery r new .no light comes on it doesn't even viberate it does nothing and the screen shows nothing what can I do to fix this any one plz help me.
Is dit een goede vraag?
Rep: 1,1k
6
5
1
If bens suggested cleaning does not work you have done something wrong or one of the components you replace is faulty or you shorted something when fixing it
Was dit antwoord nuttig?
Rep: 85
4
Check your battery connection if you disconnected it. Look for damage on the board by the battery connection that might have been caused by prying up the connector. If you didn't disconnect the battery there is a chance you blew the backlight filter. There is also a chance something could have been knocked off the board while removing the the LCD, Digitizer or Camera flex connector.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 83
Check the charger port for any dust or lint. If there is some, use a toothpick or something equivilant to get the gunk out.
door Ben