I would like to know why my speaker isn't working after a phone swap. By phone swap i mean taking every single thing out of one iPhone housing and putting it int another. I checked everything else and they work perfectly fine except the speaker. I changed it with a working one -didnt work, cleaned the contact point - didn't work could i have torn something?
Is dit een goede vraag?
Rep: 159,7k
11
191
368
Did you mean top speaker (earpiece speaker, used to hear sound during calls) or bottom speaker (loudspeaker, used to play music, ringtones and etc.)
If it's the bottom speaker, there is a chance you may have ripped the charger port dock assembly cable slightly where it has a connection to the bottom speaker. You can check this by physically looking at the cable. If it is ripped, you will need to replace the charging port dock cable assembly.
For the top speaker, it is most likely not aligned well enough for the top speaker to have contact with the gold contact points on the front camera flex cable assembly which sits behind the front display. Also make sure that the metal cover prongs are correctly seated on the plastic frame behind the iPhone display. There is one at the left and one on the right of the metal cover. The left side slides in a hole and the right side slides in a hole as well which will sometimes needs to be pushed in the hole to the left to lock it in place.
Was dit antwoord nuttig?
Yes the bottom speaker is not working but if the charging cable is ripped wouldn't that mean the phone can't charge at all?
You can break the cable and still have part of it functioning . you should be able to see any damage across the cable look for folds or bends and lookclosly at these spots for breaks in the cable .
Yeah, the charging flex cable assembly comprises of multiple circuit lines which you can physically see as they are like bumps.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 105
