Ga door naar hoofdinhoud

Reparatiehandleidingen voor een groot aantal Kodak digitale en analoge camera's.

263 Vragen Bekijk alle

kodak z650 lens won't respond, powers up and then shuts off

hi, just trying ( a little unsuccessfully) to open and fix this camera but am running into problems with taking leads off from logic board etc. some of the leads are quite straight forward and i can flip up little black strips and then pull out the lead. however there are several small white connectors which i can't find on any guides here. they look like they just pull up....but i can't see how and i don't want to wreck the camera just yet.

any help or links would be appreciated. i have googled and searched a whole heap of sites but was hoping for someone on here having a more expert/hands on approach.

cheers

jen

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
1 Opmerking

i know a picture of the part would be helpful... that's the reason for fixing my camera! my other camera is on the blink too. sorry.

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

I will include a link when get the chance. The connector is made of 2 parts- the side where cable goes in has tabs on either side. Use a screw driver to lever the tabs horizontally 1 mm. Cable then slides out !

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

pollytintop zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 7

Altijd: 704