Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Opties

Does the flex cable have to be changed too? Error 53.

Is it enough to replace the home button to the new screen when replacing broken screen in order to not experience error 53? Or do I also have to replace the flex cable going from the home button to the motherboard?

I have been saving a lot of time when fixing phones by having pre-installed camera and metal plate on the phones before I fix screens. So I have only been moving over the home-button from the broken phone. But now I am afraid that this will cause error 53 if I do not move the original flex home-button cable over too.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

The bridging flex cable is just cable, point to point, as long as the cable on the new screen is intact, there is no need to transfer the old cable over.

You can verify this by testing Touch ID function after the repair. If Touch ID works, no problem.

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

So error 53 will only occur when the home-button is damaged or if I use an un-original home button?

door

Voeg een opmerking toe

Opties

To my knowledge the Error 53 is only caused by the home button itself. The extension cable should not cause the error when updated. I have replaced two extension cables so far and not had a problem with those devices getting the error.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Hans zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 69