Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Opties

iPhone 6 not turning on - tried almost everything

Hey iFixit Team,

I purchased an iPhone 6 which was not turning on. It had a cracked screen and once opening up I could tell the battery had been replaced.

I replaced the battery and screen with genuine parts from an iCloud locked iPhone 6. I got the phone turning on but it was running slightly hot and draining faster than normal.

I restored the software from recovery mode and the problem persisted. Now the phone does not turn on after I left it dead for a while. I know I could probably get it to turn on if I put a charged battery in but I would like to fix the root cause. I have a feeling it might be a motherboard issue but would like to seek clarification and advice...

I have careful performed the screen replacement and reinstalled the battery with the proper apple adhesive strips so I should be able to get a replacement from apple if I can't get it fixed.

Thanks again,

Nick

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Your answer lies within your question "I got the phone turning on but it was running slightly hot and draining faster than normal"

And now the battery has died it won't charge.

These are clear symptoms of a damaged U2 IC:

- Fast draining battery

- won't charge when dead

- phone getting hot

You need to replace the U2 IC, and this should solve your problem, this requires knowledge and the equipment to do microsoldering. :-)

Was dit antwoord nuttig?

Ja Nee
Score 2

3 opmerkingen:

Thanks for the quick reply! That doesn't sound like a repair I could perform or do you think it is worth learning? I might see if apple can replace it..

door

It requires pretty expensive equipment, decent microscope, decent soldering iron and reflow station, decent solder and flux, etc.

You can try Apple and see if they will replace the device.

door

Thank you, will try apple and let you know how I go!

door

Voeg een opmerking toe

Voeg je antwoord toe

nickb1994 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 241