Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Opties

iPhone 6 Bent housing no signal/service

iPhone 6 housing bent and motherboard bent towards the bottom of the phone and motherboard, everything works except that it will not get any signal/ cell service. It works on wifi, but on the top where it usually says the carrier it keeps saying searching, even after I pull the SIM card out it keeps saying searching. No bents anywhere near the SIM card reader. Tried a different sim tray, network reset, opened the phone and checked all the connectors and components. I haven't done a restore on the phone. I believe it mind be hardware related because it happened when the phone got badly bent. Any suggestions on things to try or how I can fix the problem. Thank you

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 3
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

Reflow the entire cellular section, reball the cellular chips if necessary.

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Opties

What does reflow and reball mean?

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Reballing is a method of soldering which requires balls to be placed underneath the chip. The process requires a de-solder and a fully equipped solder station. You have to desolder the cellular chip with a de-solder station and resolder it. Trust me it's a nightmare. You're gonna want to take it to a specialist or get a new phone.

door

Voeg een opmerking toe

Voeg je antwoord toe

Dewells zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 3,963