Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Opties

Phone won't charge after replacing lightning connector & battery

I replaced my battery and lightning connector with ifixit parts.

  • The phone powered up after reassembly and the battery was at 70%
  • The battery guide said to calibrate the battery by letting it drop to 10% and then charge it uninterrupted to 100%.
  • When my battery dropped to 10% I tried to charge it, but the phone won't charge

I took apart the phone twice to check all the ribbon cable connections, performed a hard reset, but it still won't charge. Any suggestions?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Thanks for your question.

Sorry for your troubles.

When replacing connetors, buttons, or ports, (parts that are lower on the price margin than the more expensive components of devices) it's a good idea to buy two or maybe three of the parts to circumvent having to deal with defective parts.

This may be your situation. Defective lightning connector. It happens in the repair world four sure. Parts just go bad sometimes.

Seems like the short of it to me. That would be my next step if this was my repair.

Hope this helps.

Good luck.

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

You're probably right. Now that you say that, I did have to remove the new one once because it didn't align properly. I probably messed it up. I'm gonna order some more. Thanks.

door

Voeg een opmerking toe

Voeg je antwoord toe

Brian Cornelius zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 72