Ga door naar hoofdinhoud

Model A1288 / 8, 16, or 32 GB capacity

451 Vragen Bekijk alle

Newly Installed battery won't charge

I just replaced the internal battery successfully using the guide here, but I noticed that the battery doesn't go above 8%. I bought the battery at this website. It's stuck at 8% for more than 2 hours and it says its fully charged (plug icon on battery)

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

prior to battery failure, nook fell on floor while charging, hitting on the charger plug. Could this cause the new battery not to charge correctly?

door

Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

I would just make sure that the battery cable is sitting flat and that any of the connections are not touching the board but only the contact. If the cable is not put on perfectly it can cause it to not fully charge up.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

unknownboy95 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 699