Repareer je spullen Gemeenschap Winkel

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Vragen Bekijk alle
Vraag afgerond

Opties

Guidance requested for installing Camera & Sensor Cable Shield Sticker

After my first "fail" in repairing an iPhone, I'm starting over, with new parts. In addition to a new front panel (I tore a cable on the "old" new front panel), I also ordered a new Camera and Sensor Cable Shield Sticker to replace the original one which looked pretty worn out after having been removed and replaced at least twice.

After reviewing assorted how-to guides, I've yet to find one which details how to go about replacing this part. I'm planning on just figuring it out as I go along, but I'd sincerely appreciate it if others would share their experience/advice. (I'm really hoping to avoid future problems with this project!)

Thanks in advance for sharing your knowledge.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Thanks @WiN6MaN. After debating the risk of damaging the ribbon vs. the need for the sticker in the first place, I opted to stick (no pun intended) with the original Cu sticker. Hopefully I won't regret this decision.

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

It sticks right behind the camera itself, you need to separate the camera and the ribbon a little. But be careful to not separate it to much or you'll break the ribbon.

Honestly tough this sticker is not crucial and even if it's not there the camera/light sensor will work just fine.

I think it serves as a ground to avoid or lessen screen static.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 34