Ga door naar hoofdinhoud

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying. Released on March 11th, 2011. Model numbers: A1395, A1396, and A1397.

729 Vragen Bekijk alle
Vraag afgerond

LCD screen goes black immediately after turning on

The iPad was brought in because the customer thought the charging port was bad, i plugged it in and it charged up. When you power on the device it comes up to the apple logo and then comes to their home screen, within a few seconds the screen goes black, if you press the home button and power button quickly ( not hard reset ) the screen will light up and then goes right back to black. iPad is still on because when we plug it into the computer it shows it connected. We have already tried the following and still having the same result. has anyone seen this before?

We have tried:

New LCD

New Power switch

New charging port

I don't think it would be a battery issue because the device isn't shutting completely off. every now and then when you press the power button and home button it will do a soft reset.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

1 Opmerking:

could it possible be the magnets on the side? they don't have a smart cover or anything but could that be the issue possible?

door

Voeg een opmerking toe

1 Antwoord

I have an iPad 2 here that will boot up , the apple logo comes on, then disppears. About a minute later the home screen will appear and it functions as normal. Is it possible that you may need to wait a minute or so after booting the customers iPad?

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 88