Ga door naar hoofdinhoud

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1623 Vragen Bekijk alle

New hard drive doesn't show up in disk utility?

A couple of days ago, my hard drive, stopped working (flashing question mark). I bought a new 1tb sshd from Seagate, and have tried to boot using this, and a memory stick i have with os x yosemite, this does not work. The new drive doesn't show up in disk utility once i boot on the memory stick. Anyone know wether it's the sata cable, the firmware, or anything else that causes the problem, and a solution?

Thank you :)

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

This series had a lot of problems with the SATA cable, I would start there.

This is such a common problem IFIXIT has a special guide just for it: MacBook Pro 13" Unibody Mid 2012 Hard Drive Cable Replacement. Here is the cable you need: MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable.

After you order the part you can also check the systems firmware following this Apple T/N: About EFI and SMC firmware updates for Intel-based Mac computers. Yosemite & El Capitan both upgrade the firmware so it might be newer than what Apple has listed here.

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable Afbeelding

Product

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable

$34.99

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

Voeg je antwoord toe

Petter Thorsen zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 2,185