Ga door naar hoofdinhoud

Repair and troubleshooting guides for the Apple Pro Speaker, which has the model number M8756 These are Harman Kardon-built speakers with an Apple proprietary connector. They are only compatible with the iMac G4 and PowerMac G4.

2 Vragen Bekijk alle

How to take apart the Amp of the Apple Pro Speaker?

Hey, my G4 Cube speaker recently has the cord of amp loosen. I want to open tge amp case to fix it. But I couldn't find any source in the internet. Could you please assist?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
6 opmerkingen

Thank you for your reply. My Apple Pro Speaker is the one come with the G4 cube, which has a translucent shell for the amp. I woul like to know the way to open the shell without damaging it.

Thanks anyway:)

door

Is there a identification number on it? Like an A1122 number?

door

I don't know. But the picture in this link shows the speaker:

http://blog.pardner.com/2012/08/using-th...

door

So far I found only this picture

http://www.audioimprov.com/AudioImprov/S...

door

Thank you. But the auther didn't tell how it was open.

door

1 commentaar meer tonen

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

See if this guide will help you: Using Apple Pro Speakers with a class-d amplifier

UPDATE

See if this guide is what you need: Repairing Apple Pro Speakers Loose Cone

Apple Pro Speakers M8756 Afbeelding

Handleiding

Using Apple Pro Speakers with a class-d amplifier

Moeilijkheid:

Moeilijk

20 minutes

Apple Pro Speakers M8756 Afbeelding

Handleiding

Repairing Apple Pro Speakers Loose Cone

Moeilijkheid:

Gemiddeld

30 - 45 minutes

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe
Het nuttigste antwoord

for anyone else:

I just recently popped my Cube amp open as well. It seems like it's just glued shut, but it's not a chemical glue so you should be able to pop it open with minimal difficulty. I used a piece of sheet metal about the thickness of a razor blade, so a razor blade itself would probably work to open it up.

Block Image

Just be careful because the bottom half has a groove that the top half actually fits into; you can't just slice a razor straight down because it will hit the bump.

Block Image

Was dit antwoord nuttig?

Score 2

2 opmerkingen:

Hey Josh what was your experience getting the inner shell open? I'm at that point and am concerned about damaging the plastic in the process. Any pointers? Thanks!

door

Just kidding. I managed to get it open easily by working a scalpel into the corner near the cords and then slid a sheet of thin metal like you mentioned slightly farther down and it came apart relatively easily. From the bottom end where the output is, I worked across and the whole thing eventually opened like a book. problem solved!

door

Voeg een opmerking toe

Voeg je antwoord toe

chogokinaholic zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 12

Altijd: 1,763