The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying.

914 Vragen Bekijk alle

iPad 2 black screen

My iPad 2 screen went black... i see it's turn on... back light but no image. Hard reset won't do nothing. When i do a screen capture i momentarly see my screen a little...

I tried to to hit it a little like i saw in some messages but it's doing nothing. Any help please?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

3 Antwoorden

Gekozen oplossing

Yeah, your backlights out. Not super big on iPads. But, I think you just need to replace the LCD.

iPad 2 Wi-Fi EMC 2415 Front Panel Replacement

iPad 2 LCD

iPad 2 LCD afbeelding

Product

iPad 2 LCD

$79,99

Was dit antwoord nuttig?

Score 2
Een opmerking toevoegen

It's likely that the iPad will need to have the lcd cable reconnected. Sometimes smacking the back doesn't work. With the proper instructions And patience you can open the iPad and do this. Be sure to power the iPad off first though. Just hold the power button for about 5-10 seconds then swipe not the screen towards the top where slide to turn off would be. You should see the backlight dim slightly then turn off.

Follow the ifixit guide to open an iPad 2, and you'll be good to go.

Was dit antwoord nuttig?

Score 2
Een opmerking toevoegen

Didn't work, followed the procedure and did what was required with no changes. Still a dark screen.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

martinesabourin zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 7

Altijd: 337