Rep: 9
1
• Tried Restart in Safe Mode. No joy.
• Tried Resetting PMU. No joy.
• Has a dead battery so, to date, have been operating on AC only
• Was in sleep mode before problem occurred
Is dit een goede vraag?
Rep: 685,2k
3,4k
1,1k
2,6k
Three beeps = RAM problem
Reseat RAM first.
Was dit antwoord nuttig?
Right + It's worth noting that these machines suffered from bad RAM slots on the logicboard. Try both slots, swap everything around and try with a single RAM in either slots.
good on ya fullas! will give that a go.
+
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 1,623
2 opmerkingen
• Reseat RAM - No Joy
• Disconnect then re-connect PRAM - No Joy
door RikiApa
It's still a RAM problem. Did you get new RAM?
door mayer