Ga door naar hoofdinhoud

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

408 Vragen Bekijk alle

Why won't my screen stay stuck?

I replaced the screen on my iPad 4. I cleaned all the old adhesive off with alcohol and let it sit for awhile to make sure it was gone. The applied the screen and let it sit for about an hour then turned it on for a minute to make sure it worked. Then let it sit for another few hour. Both times I weighted it with a couple text books. And repeated it a few more times and every time it peals up. Does anyone have any advice?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

I tried but it didn't help.

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

I would try heating the new screen to allow the adhesive to bond better.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Kyle zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 53