Ga door naar hoofdinhoud

Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4941 Vragen Bekijk alle

Frame/screen/glue is this an easy fix?

Block Image

Block Image

The screen bit is comming away from the frame, any ideas if this can be fixed or the whole screen needs to be replaced? Or can i put glue there? what kind of glue would I need? Any help would be much appreciated!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

It's most likely the parts you used, to replace your screen. Sometimes I see it happen with oem screens. I also usually use a flathead screwdriver, and carefully pry the bottom of the assembly up. You can try some super glue or something. It might work. Or you could buy a quality part from ifixit. That would solve your problem also

https://www.ifixit.com/Store/iPhone/iPho...

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe
Het nuttigste antwoord

yes, that can be glued, use your imagination on what glue to use. That suction cup instead of an isesamo might have something to do with it lifting that way. Otherwise its a parts quality issue and you should be aware as you order additional parts, if all the parts from a particular supplier lift that way, its time to find a new supplier.

Was dit antwoord nuttig?

Score 1

Commentaar:

would superglue work?

door

I mean it might. You also gotta think. Superglue usually leaves kind of a non clear grey residue. Especially if you put too much

door

what about loca glue?

door

Usually clear. Really should use a uv light though. To get that to harden

door

awesome will give it a go tomorrow

door

Voeg een opmerking toe

Voeg je antwoord toe

sunny1 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 122