Right side of the headphone is not working..!
Both the phase and ground wires are at the correct position and soldered well...but its not working..why..?
Is dit een goede vraag?
Score
2
255022
1 Antwoord
Rep: 781,7k
1,1k
893
2,3k
Dino Ram, you must do a continuity test from the jack to the driver. If that checks out ok, you may have a bad driver (speaker). If it does not then it is possible that this is caused by a bad jack (connection).
Was dit antwoord nuttig?
Score
0
Any other cases
Yes ever wire is properly soldered
door abhiom27