The Kenmore Elite HE3 is a washing machine by Kenmore.

620 Vragen Bekijk alle

All lights come on, no error code. Doesn't turn on.

Hi,

1- How do I get an error code so I can diagnose?

2-Everything 'looks' fine, but machine won't do anything.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen

Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

Doorblader onze winkel

Ever fixed something? That’s Genius.

Share your repair story with #ImAGenius

We Are All Geniuses

Share your repair story with #ImAGenius

2 Antwoorden

Bryan Wachs, start by trying to reset your washer by unplugging your machine, and plug it back in after 5-10 min. DIAGNOSTIC TEST

The control must be in the OFF state before pressing the touch-pad sequence to start the test.

Starting the test mode

Close the door.

Press the Control On button.

Select the DRAIN/SPIN cycle.

Select NO SPIN by pressing the SPIN SELECT button, as needed.

Push Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display.

NOTE: If Model does not have PREWASH Mode as an option, press RINSE/HOLD.

If the Starting procedure fails, push PAUSE/CANCEL button. Then repeat the starting sequence.

Test Program Control during Execution

To advance to the next step of the test procedure, push Prewash Option button two (2) times."

Let us know if it works and if you get any "C" code

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

The problem was the plunger switch broke off at the top of the latch.

Thanks for you help!!!

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

Bryan Wachs zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 6

Altijd: 253