After following the HP Photosmart D110a Scanner Glass Replacement tutorial and reassembling, the printer won't turn on.
All wires were reconnected and the power button face was reinserted.
I was not grounded when I disassembled the printer.
Is dit een goede vraag?
Rep: 85
2
Disassemble the printer as you did when replacing the glass, there is a small cable that you need to make sure is connected properly. Recheck all flex cables. Being grounded will not short the printer out. Test outlet also with a lamp, be sure outlet works.
Matthew Lucas
Was dit antwoord nuttig?
Rechecked flex cables and tried a different outlet. Printer powers on again.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 149
