Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

High Quality Copy or Original Glass Digitizers?

This question goes out to all the repair shops. I went to place an order for iPhone 6 digitizers for the first time and my supplier offered me a high quality copy digitizer for $51 or an original digitizer for $63.50. I'm not sure which one to get. We obviously all want to make the most profit from each repair but I also don't want problems with the digitizers down the road or have my customers complain about the quality of the glass. I'm trying to stay competitive but I can't be doing these repairs for such a small profit. I would like to get the $51 ones but it worries me. Which one is everyone stocking up with? Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
1 Opmerking

So if Apple charges $109 I was gonna charge $100. And with the originals costing $63.5 I'm only making $36.5 profit. Is it worth it or should I advise my customers to go to apple.

door

Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

Hi,

If I am honest, none of us really have the right to be repairing the screens on iPhone 6, Apple do it at a really reasonable price, and that's for completely original screens, plus you get to keep the warranty getting it done with them.

There have been a lot of issues with iPhone 6 screens, as a lot have been falling out due to the fact the frame is extremely thin, and a lot use poor quality HMG (Hot Melt Glue) to stick the glass to the frames. Also, there are a lot of screens which are thicker and you can not only see the difference, but feel the difference as it doesn't sit flushly with the housing, and there is some major problems with the frame lifting up by the mute switch, which then shows the LCD light from the inside.

If anything though, always try to go original. :-)

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

I buy cheaper screens and notice they use just refurbished LCDs from original screens and new glass and touch.

Ive never had one come back for a faulty digitizer.

I have had some come back with the screen starting to pull from the frame. I just make sure when they come in from suppliers from now on if the screen is separated easily by just me pushing on it I apply my own epoxy to the frame. Eliminates this issue in the future.

Was dit antwoord nuttig?

Score 0

3 opmerkingen:

What kind of epoxy do you use? Any chance you can post a link to the product and what points of the frame you use it on? Or you just separate and glue back?

Thanks!

door

would like to hear to what's the best epoxy to use. Had the same issues in the past.

Thanks in advance

door

Any type of plastic bonding epoxy will do and apply it with a tooth pick. Keeps from making a mess. Also keep alcohal wipes around to clean up any excess.

You can also for a quick fix use super glue but its still a brittle bond and I don't like how it flows out and can seep onto other items.

door

Voeg een opmerking toe

I would go original, as I work hard to build my reputation of having the highest quality repairs. There are other places doing it cheaper, but I'm trying to be the best, not the cheapest.

Is the Apple Store close to you? If so, you may have to compete with them, but with our nearest Apple Store about 45 minutes away, nobody seams interested in going to them, when I can get it done it 15 minutes.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Thanks for everyone's advise. I went with the original screens.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Had any problems with the screens so far?

Where did you get your screens from?

door

Voeg een opmerking toe

Voeg je antwoord toe

AppleCrack zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 451