Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1509 Vragen Bekijk alle

How to Check for Faulty Components


I recently dropped my iphone 6 plus in the ocean when I fell off a dock. Since it's salt water, I took it home and cleaned the logic board. I can't see any corrosion except for one of the antenna wire ends.

So I put a new battery in it and plugged it in after a few days of drying and it "kinda" worked. The screen wouldn't work at all but at least iTunes was now recognizing it as an iphone in recovery mode. I tried to restore it but it would error our and never even start.

After a few days it wasn't even being recognized so I changed the charging port/headphone piece. It still doesn't work and it's still not getting recognized by itunes.

I guess my main question is this.... Where do I even begin troubleshooting for the components that are faulty? All I know is that it's not the battery or the charging port.

I already got a new phone so I'm not in a rush and wouldn't mind learning something but I just don't know where to start. Any help would be greatly appreciated, thanks!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score -1

2 opmerkingen:

martymcfly, how did you clean it and did you remove the EMI shields to do so?


I took everything apart and used electronics cleaner


Voeg een opmerking toe

1 Antwoord

Following latests news it seems that the rebooting issues of iPhone6/6+ of 64GB and 128GB are due the NAND memory controller type, so TLC insteadof MCL controller type.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

you literally copied and pasted that from google


Voeg een opmerking toe

Voeg je antwoord toe

martymcfly zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 202