Ga door naar hoofdinhoud

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 Vragen Bekijk alle
Vraag afgerond

White screen after replacing orignal screen

I just replaced the front panel of a 4th Generation iPod touch. Once i powered it on the screen went white. I followed the instructions and restated it, still white screen, i let the battery drain and attempted it it again, still white screen. I even factory reset (using RecBoot) it and it still had a white screen. I can hear it connect to the charger but the screen it white. I reopened it and made sure everything was properly connected none of the ribbon cables were kinked. Did I just get a bad part?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Yup. This is bad part. You've done all the right things, good job!

Was dit antwoord nuttig?

Score 2

3 opmerkingen:

So can i return it to ifixit?

door

i don't know the answer to that---we are all just community members like you. If it were up to me, I'd stare hard at the LCD flex and digitizer flex to see if there was a crease. If not, then sure.

door

I sent them a message, they are going to replace my part. Should be here writhing 3 days

door

Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 80