Rep: 13
1
I purchased a 6 plus to do the screen repair and flip it. The guy said he cracked the screen trying to put it back on and I started it up and worked fine when it came. I took the screen off to test another 6 plus screen I had to see how the assembly was and now that I put the original back on it doesn't have display on just shows white screen with some vertical lines. Any thoughts?
Is dit een goede vraag?
Rep: 1,5k
11
10
1
Sounds like the screen that came with the phone is shot. You can purchase a new one here and use the guide here.
Was dit antwoord nuttig?
Really, the screen would just go out after being taken off and then plugged back in?
Check for bent pins on the connector. Does this screen on another phone?
On the connector on the mother board side or the ribbon cable for the lcd digitizer? I will check on another phone to see if it's the same.
On the ribbon cable for the digitizer
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 381
