Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Nintendo handheld device released February 2011, identified by model number CTR-001.

410 Vragen Bekijk alle

Nintendo 3DS Charge but won't turn on.

Hello,

Recently I got a 3ds - The small first version.

When I plugged it into the charger, I noticed the light turn on, but when I try to turn the device on - nothing!

The lights turn off when I press the power buttom and after a few secounds - turn on again without the decive coming to life.

theres no crack on the screen.

Thanks you.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 20

Commentaar:

I got the same problem yeah its stinks

door

I dont know what to do with it... how do u fix it

door

Same i couldnt find a way to fix it

door

I want to fix it plz help

door

i couldnt turn it off even O_O

door

13 commentaren meer tonen

Voeg een opmerking toe

18 Antwoorden

Gekozen oplossing

Could be a bad battery.. You can get them from Ebay

Was dit antwoord nuttig?

Score 8

Commentaar:

I took the battery out. The nintendo is supposed to turn on when plugged to the recharger, no?

door

Is the charge light coming on when you plug it in? You may want to check the charging port for damage or if it's loose..

door

Yeah, when I plug the charger the light turn on.

There's nothing when it's not plugged it.

Also I checked the connector, it seems alright.. nothing losses, no rust and it respond very quickly once I insert the recharger

door

jewhat when i try to turn my ds of it keeps making a noise and light turns of and when i try to turn it on again it keeps turning of

door

if the issue is the light is turning and and off, the what I did is I kept pushing the power button

door

12 commentaren meer tonen

Voeg een opmerking toe
Het nuttigste antwoord

Take the sd card out and put it back in again

Was dit antwoord nuttig?

Score 20

Commentaar:

Sorry to say it but it doesn't work

door

Nevermind it works

door

THANKS! It actually seems to have worked, at least for my case! =D

door

Had the same problem. Ds would charge perfectly fine but couldn’t get it to actually turn on. Took the sd card out, blew In the system and put it back, came on the same way it used to. Thanks!

door

just made this account to thank you

i thought my 3ds had bricked for a moment

felt my blood pressure dropping

door

17 commentaren meer tonen

Voeg een opmerking toe

Check the F2 fuse next to the battery contacts (for the 3ds it located underneath, other side of the logic/mother board). If the fuse is blown, then then system will charge for 10 sec and then stop.

Was dit antwoord nuttig?

Score 10

Commentaar:

Fuse number 2. All the circuit boards components are labeled

door

Voeg een opmerking toe

Hi these units get dropped from time to time, remove the back plate the battery and then the back casing. Look up towards the left trigger there is a small ribbon cable that can come loose if dropped. Lift up the small tab (carefully) remove and replace ribbon cable. Also there is a small square adapter in the center of the unit directly below the cartridge slot this is your wifi card once again gently pry up on it and it will come loose then reattach it. If these things don't work you more then likely have a tear in the ribbon cable that connects the screen to the motherboard. I have also on occasion seen this happen on a console that some one tried to hack and failed resulting in a hard brick of the motherboard, if that's the case you can try to find another mother board or sell it for parts.

Was dit antwoord nuttig?

Score 5

Commentaar:

Yo matthew barlup thank you so much

door

Thank you so much! I know this was posted 3 years ago but it really worked so thanks! :)

door

Yes!! It stopped working after I dropped it so this does make since. I’ll try it!

door

Voeg een opmerking toe

You need to charge it longer. If no response continues, try replacing the battery.

Was dit antwoord nuttig?

Score 1

Commentaar:

YESH DIS WORKED,all the other "replace the fuse or battery"thng didn't help at all CUZ MY FUSE IS LITTY AND IT LOVES MEH

door

Voeg een opmerking toe

This just happened to me!!

I recommend:

  1. Take SD card, dust that and blow into the SD slot then replace the card
  2. If you use the charging cradle (like I do!) put your DS in it tip it about a bit. Until the light comes on… I just have a loose connection

Edit: I have a 3Ds

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

My 3ds shows the charging light but after a while it doesnt turn on still plz help me!

Was dit antwoord nuttig?

Score 1

Commentaar:

you could take the sd card out and blow the port and then put it back in, that worked for me today

door

Voeg een opmerking toe

Try doing whatever everybody else says and if that doesn’t work, try putting the ds back together and take out the game card and sd card and squish the system around, not too hard but hard enough that it will put anything in place that might be loose.

I did that out of frustration and to my surprise it worked!

Was dit antwoord nuttig?

Score 1

Commentaar:

You are a god. i tried everything above and didnt worked. i shaked it like mad and suprise!!! It works! Thanks!

door

Voeg een opmerking toe

I bought mine on OLX, but 2 days ago it stopped working, black screen and can't update because it is already on 11.9, and my SD card don't read, I formated my SD and 3ds don't created a folder. HELP :/

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

When i turn on my 3ds it tries to for a few seconds, makes a snapping noise then shuts off

Was dit antwoord nuttig?

Score 0

Commentaar:

That exact same thing is happening to me to and I don’t know how to fix it or what to replace , I try turn my 3ds on it shows the blue light for a few second and does the exact same thing the snapping noise and shuts off , does anyone know the problem and how to fix it ?

door

I have the same issue. I tried the battery in my sister ds and that's fine so have no clue what's wrong with it

door

Voeg een opmerking toe

I am really frustrated at this point…I would replace the ribbon..BUT HOW DO YOU DO THAT!??!

Was dit antwoord nuttig?

Score 0

Commentaar:

If you need to replace the ribbon cable, you can try soldering a new one yourself, or just replace the part where the ribbon cable is AKA if its a trigger ribbon cable, try replacing the trigger

door

Voeg een opmerking toe

Take out the SD Card and Game Cartridge.

Clean the connectors on both.

Blue into the open slots really well a few times.

But the card and cartridge back in.

Turn it on!

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

None of this $@$* is working!!!

Was dit antwoord nuttig?

Score 0

Commentaar:

Same here have you found any other solution s

door

My 3ds will show the charging light but the blue power on light won't turn on and it's not dead, so what is wrong with it?

door

Idk i have the same problem with my 3ds

door

Voeg een opmerking toe

Just go somewhere and get it examined if none of this works.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

“Thank you” not “thanks you”

Was dit antwoord nuttig?

Score 0

Commentaar:

Bro who cares about how they said it

door

Voeg een opmerking toe

om g this workssssssssssssssssssssssssssssssss yessssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss ok so guys you have got doscrew it then grofi;jdpwerlgtosPAD:WEIORTgzlfu;DIEAFxsglfzo;adxlhgsifd

Was dit antwoord nuttig?

Score 0

Commentaar:

soooooooooooooooooooooooo

door

Voeg een opmerking toe

The charging light on mine lights up but the blue light wont light up and it wont turn

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Excuse me? I changed my 3d slider module (it didn’t regulate 3D) and when I finished, it was doing the one second and popping (and charging led turned off for a while) after pressing power button.

Then I moved a little bit more the connections and now 3D led indicator turns out when I press power button (with an inmediate very soft click on the speakers), and then inmediately turns off. Charging led stays all the time.

Is there anybody who has experienced this last thing?

Was dit antwoord nuttig?

Score 0

Commentaar:

check if 3d module is plugged properly into the top lcd. Then check if the 3d module is plugged in properly in the motherboard. It may be loose. It should go all the way in without any resistance. If you can't get it in, then you may have bent a pin within the plug

door

Voeg een opmerking toe

Voeg je antwoord toe

ChubbyKai zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 56

Afgelopen 7 dagen: 383

Afgelopen 30 dagen: 1,657

Altijd: 162,968