Rep: 475
6
8
1
Hello
I have rather clumsily managed to break the copper grounding tape which is on both iphone 5S and C models.
This appears to cause a bit of ghost touching on the digitizer.
Has anyone any ideas about how to repair this, or where I might get a replacement part from?
Many thanks
John
Is dit een goede vraag?
Rep: 5,3k
9
15
4
I don't think the broken tape would cause that. I have a 5s on the bench right now with broken shield tape and no ghosting at all. Check to make sure your connector is properly seated or you may have a faulty replacement part.
Was dit antwoord nuttig?
I agree with Brian. I have repaired many a Iphone 5S frontcamera ect, flex that did not have the copper tape with no problems.
Rep: 105
5
1
I have found ghost touching can be caused by defective digitiser try a different display assembly it may just do the trick.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 1,329
ok great I will have a look and let you know. Some people say that the tape is for heat distribution and others say it is a grounding tape..
door John