Ga door naar hoofdinhoud

Repair information and guides for the Apple iPhone 5c that was announced on September 10, 2013. Model: A1532, A1456

1232 Vragen Bekijk alle

I've just got finish replacing my screen

I replaced the screen on my iPhone 5c and all I see is a black screen and white lines going down the left side of my screen.I can still turn my phone on and off but when I turn it off I don't see the "slide to power off" or the Apple logo when I turn it on. I just see white lines. Also, I looked at my digitizer and my LCD cable and they look completely fine. I also hear the snap when im connecting them to the logic board. So, I have no idea what can be wrong with it

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
1 Opmerking

Can anyone help me or tell me what they think the problem could be.

door

Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

kobe, something like that

Block Image

can be caused by a bad digitizer connector

Block Image

Block Image

like this. Check the ends of the connector. The plastic of the connector has been compressed into the connector, causing it to flare out and preventing from making proper contact.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

It could be a faulty display order a new display and fit it and see it it works.

When you switch the phone on can you still call the phone and it rings?

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Possibly the LCD flex ribbon connector is the problem, check if it's dirty or damaged. Or you'll have to buy a new replacement.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

These guys are right---bad displays are really common. You'll have to rule that out first before looking for board damage which can also cause this.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

kobe zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 124