OPGELOST: Logic board or power supply malfunction - iMac Intel 21.5" EMC 2428

Logic board or power supply malfunction

I tried to put ssd drive in my imac mid-2011 , and then I tried to turn it on , I heard the sound of the drive and nothing else happens , it just turns off . I turned off the display to get to the logical board. 1 led lights when I press the power button led 2 turns on and shuts off immediately . sometimes led lights 3 lights , I hear the sound , and it breaks not completed . tried to reset smc but failed. tried to include imac when the fans are running at full Power steering . In this mode, imac is behaving strangely , the fans turn on one by one after every reboot .

Questin is translated by Google translate, sorry I'm not English

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score -1

1 Opmerking

Give us both your native language and the translation sometimes it helps ;-}

7 dec. 2014 door Dan

Gepost: 7 dec. 2014

Opties

Did you take the HD out and replaced it with a SSD? Or did you add the SSD (dual drive setup)?

Try disconnecting the SSD cables to see if the system will start then. If you still have the HD in you should boot up, if you took the HD out you should see a blinking question mark in a folder icon.

Was dit antwoord nuttig?

Ja Nee

Score 1

2 opmerkingen:

I add ssd, not replace.

I try with ssd and try without ssd boot up iMac, but nothing happened...

When I press the power button, hear some noise - CD-ROM, look like try to start but cant

7 dec. 2014 door imullika1

Recheck your connections between the system and display. Did you damage or forget a connection?

7 dec. 2014 door Dan

Voeg een opmerking toe

iMac Intel 21.5" EMC 2428

Logic board or power supply malfunction

1 Antwoord

Voeg je antwoord toe