Repareer je spullen Gemeenschap Winkel

Repair information and guides for the fifth generation of iPhone. Model: A1387

2191 Vragen Bekijk alle

Opties

Why is the dock connector cable port assembled on the back?

The dock connector cable runs from inside the iphone 4, wraps through to the top by the power button from an opening, and wraps on the back side of the device, where the cable and ports are attached by what seems to be some type of adhesive. I haven't even opened up the phone yet myself, because I don't have the tools. If anyone can tell me anything about this, or if it's fixable at all, I would greatly appreciate it.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

This makes no sense send a picture

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

The dock connector cable does not connect from the bottom of the iPhone to the top as you describe. It goes from the bottom to the mid logic board connector, very simple actually. It does involve disconnecting the home button flex cable and removing and replacing the cover to the lower microphone. Here is the iFixit Guide for this repair. iPhone 4S Dock Connector Replacement

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

jasonwiggins1982 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 43