Ga door naar hoofdinhoud

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1479 Vragen Bekijk alle

Power Button Doesn't Click after Housing Replacement

I replaced the back housing on my 3GS, but I can seem to keep the power button from going flush with the housing. It seems to work okay, but doesn't "click" like it used to. Any suggestions?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

3 Antwoorden

Het nuttigste antwoord

I think taking it apart again and attempting to reseat the button would be your best bet. I can't think of any other safe/easy way to do it.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

I know this an old thread, but I thought I'd put my solution up for anyone reading this in the future: I ordered a new button, and when I looked compared it with the old button, it was missing a little plastic rectangle on the back. I took it off the old button (it just peeled off), and I put it on the back of the new button. When I screwed it all back together, it clicked, when without this plastic rectangle, it didn't. Hope it helps.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Check the Copper Connectors under the Top Half of the Screen

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Jacob zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 2,880