Ga door naar hoofdinhoud

Reparatie-informatie voor printers gemaakt door Canon.

427 Vragen Bekijk alle

Canon PIXMA iP3000 printer waste ink absorber full?

How do i fix the problem of waste ink absorber being full?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

If you don't think it's actually full, try resetting the page counter.

1.Turn off printer

2. Hold down Resume button and press Power button

3. Keep holding down Power button and let Resume button go

4. Press Resume button 2 times then let BOTH buttons go

5. Green lights will flash and then stop.

6. When green lights are solid, press the Resume button 4 times

7. Press the Power button and the printer should turn off, if not, press the Power button once more

8. Your printer should respond as normal

Was dit antwoord nuttig?

Score 1

1 Opmerking:

the message im getting for pixma mp190 is "ink absorber full" and there is not a resume botton on this on

door

Voeg een opmerking toe

Voeg je antwoord toe

Ali Zanjani zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 4

Altijd: 4,815