Ga door naar hoofdinhoud

Miniature one watt version of the classic Marshall half stack. With a tone knob and overdrive channel, it offers portability without sacrificing playability.

7 Vragen Bekijk alle

Micro Amp Battery power not working.

My MS-2R micro amp by Marshall has never failed me in the past but I recently noticed that when I try to use battery power it doesn't work. The wall input works and sounds fine but the battery power doesn't work. I have replaced and used at least 3 different batteries but still no solution.

please help, have a nice day

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

Had same problem

I Took the thing apart and there was nothing wrong, I took the wires off the battery contacts and put them directly onto the battery and it worked. So I discovered the problem was the battery wasn't wedged up against the the contacts hard enough. So I cut a piece of card and folded it in half and wedged the battery in there. Switched it on and it started first time, never had a problem since

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Ahhh thank you!! This worked for me - I also had looked inside and all wires seemed fine - did as you suggested and bingo!


Voeg een opmerking toe

Voeg je antwoord toe

Jellyfish zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 28

Altijd: 3,016