Repareer je spullen Gemeenschap Winkel

Model No. A1367 / 8, 16, 32, or 64 GB capacity

914 Vragen Bekijk alle

Opties

Touch screen is not recognizing my touch/commands

I used the itouch 4gen repair guide. bought the parts and seem to have no problem to after connecting the copper wire(guess its the LCD). Once I powered on the device I see the screen fine.

The only problem is the itouch will not recognize my fingers. I have swiped, touched and nothing happens.

I clipped in the black tape(guess the digitizer tape) to the logic board and made sure it did not fall out. secured the metal plate back on and turned it on. Whats wrong?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

The digitiser cable is not fitted securely when you think it is seed correctly place the motherboard back in its place then directly above were the digitiser was plugged in push down on the motherboard this will snap the connecter in place you should hear it connect in place

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

It worked thank you so much!!!

door

Voeg een opmerking toe

Voeg je antwoord toe

Sarah zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 52