Repareer je spullen Gemeenschap Winkel

Repair information and guides for the fifth generation of iPhone. Model: A1387

2193 Vragen Bekijk alle

Opties

Is this the culprit?

Okay so i tried a self repair on my iphone 4s. i replaced the screen and everything is fine. when i turned it back on,it keeps saying No service. Wifi is fine, and so is bluetooth.

when i opened it back i noticed that component in the yellow box is missing. so

1. could that be the source of my problem?

2. if yes, would soldering it back in (cause i still have it) fix the problem?

3. are there any other solutions besides soldering it in

4. does the component in the green box beside it have anything to do with my problem?

Thanks!

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Douglas,the red square is reference designator J3_RF and it is a MM4829-2702 connector. The green square is reference designator J4_RF it is a MS-180 connector. Yes, both connectors are for antennas and part of the RF circuit. It stands to reason that you will not have any service if you do not get a signal. The only way to repair this is by soldering the connectors to the logic board. do not try glue or any other means. It will fail. Hope this helps, good luck.

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Excellent! thank you so much oldturkey

i will take it to a technician tomorrow and let you know

door

Voeg een opmerking toe

Opties

Hi there I wouldn't be an expert in the componants department but around that area is were the signal traces are

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Douglas zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 66