Ga door naar hoofdinhoud

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

299 Vragen Bekijk alle

connecting charging port ribbon cable to circuit board

How does the charging/docking port ribbon cable secure to the circuit board the ribbon cable seems like it was glued with epoxy or somthing .not sure ..way to small for solder..it was originally attached flat to the board...

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

The charging port ribbon cable comes with it's own adhesive, so it can be glued on.

You can see the link of dock connector flex cable replacement, the area with blue film is where the adhesive on.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

I had to remove the motherboard to check this out the other day. It is soldered to the board. Not glued.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

greg zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 755