Ga door naar hoofdinhoud

Late 2011 model, A1278 / 2.4 GHz i5 or 2.8 GHz i7 processor.

591 Vragen Bekijk alle

screen won't turn off when closing lid

Just changed the MagSafe DC-in board, followed every step on guide, now my screen won`t turn off when closing lid. How can I fix it?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 4
Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

Check your ribbon cables. It sounds like one is not correctly seated.

I would check the hard drive cable first as it has the sensor attached to it. Review Step 26 in this IFIXIT guide MacBook Pro 13" Unibody Late 2011 Upper Case Replacement

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

The screen sleep magnet could of slipped out of place or energy saver could be set to "never sleep". You could also try to reset the SMC---http://support.apple.com/kb/HT3964.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

I have the same problem with sleep mode.

SMC reset and replacing sensor without success.

BTW I don't know how to replace the sensor of sleep LED and lid. Can anybody help me?

Was dit antwoord nuttig?

Score 0

5 opmerkingen:

What sensor do you replace?

door

Replacing Ribbon Cable from HDD with IR Sensor and LED. But i don`t know, where sitting the sleep sensor

door

The lid sensor is a small Hall effect transistor which is mounted on the ribbon cable assembly you replaced. It is part of the plastic bracket where the the IrDA sensor is located. It you take a steel paper clip and slide it across the left sides of the displays edge of the lid you'll locate the magnet which mates up with the Hall effect transistor in the case when the lid is closed.

door

how he looks the effect transistor ?

door

Please review this: Hall Effect transistor

door

Voeg een opmerking toe

Voeg je antwoord toe

Francisco Hood zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 8

Altijd: 9,542