Repareer je spullen Gemeenschap Winkel

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

52 Vragen Bekijk alle

Opties

replaced screen on iPad 2, now screen doesn't display anything

I have recently replaced my iPad 2 screen. It all went well (I thought) however after putting back together and turning on, nothing is displayed??? I can see that the screen is lit but very dim. When plugged into laptop I can see the iPad and it all seems to be working fine. It makes the click noise when I lock the screen also. but its just blank.

I've tried to reboot it - holding home and lock. also restored it to factory. still nothing.

Please help!

THanks

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

It seems to be a backlight issue, have you tried another Screen/Digitizer?

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Opties

Did you forget to reconnect the LCD cable to the logic board?

Or

Made sure you pushed the connector all the way in?

If that doesn't fix your problem you could try to replace the LCD?

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

brettheidy zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 245