Repareer je spullen Gemeenschap Winkel

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Vragen Bekijk alle
Vraag afgerond

Opties

home button doesnt work after multiple fixes

My power button went bad a while ago. when I replaced it, it worked. but then my home button stopped working. I noticed that the two gold connectors were bent from me opening it so I replaced the lightning flex cable. Still no home button. so I finally replaced the home button flex cable and it still doesn't work. What can I do??? ive replaced everything I can to get it to work and it still doesn't work!! HELP!!!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

6 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

If you open up and leave screen and all connected and press power to make phone sleep don't turn off.. Now with a screw driver touch the two metal prongs with the metal shaft at the same time this should light up your screen as if you were pressing the home button and will tell you that the part is working.. Do this first and report back

Was dit antwoord nuttig?

Ja Nee
Score 3

1 Opmerking:

If you touching the two conectors with metal and it's not accivating the screen the try a new charging port it makes contact with the home button..

door

Voeg een opmerking toe

Opties

Do what con says. Also, does it feel normal? What happens when you press the home button? if it does not spring back up, you might be missing a tiny, but important metallic square that goes on the back of the home button

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Opties

My home button doesn't work so i replaced the ribbon cable, still no joy. However, if I press on either side of the home button while pressing the home button it works!

Maybe see if that makes the home button work?

If so, how would you fix that?

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

I tried what Con suggested and didn't have any luck. I replaced my battery last night andd since then my home button wont work. I tried bridging those two connectors and it doesn't do anything either. Any idea what else it could be?

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

Yes, when replacing your battery, you must have pried between the battery and the logic board, just next to the sim slot. This is a common mistake that causes damage to components in that area that control the function of the home button and also of the power button.

door

Voeg een opmerking toe

Opties

If you actually made a good connection between the two leads, it's more likely that you have an open filter ( acts like a fuse) in the logic board.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

how do you fix the open filter ???

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

You replace it.

door

well, bit more specific please :-)

Where do i find it ? easy to replace or fideling like heck with solderingiron ???

door

Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 429