Repareer je spullen Gemeenschap Winkel

1203 Vragen Bekijk alle

Opties

More unfortunate problems-top case

Well, thanks to the helpful community here I got the top case attached properly. However, in the process of removing the top case, it seems that it is now damaged. The KB and Trackpad did not work. So I disassemble again, then the power button does not work. I examine the ribbon cable, and it has a crack running through it where it folds, and it was clearly cut.

I realize I have no other option but to buy another top case, but I just thought that I would post here to see if there is any specific thing I should do to protect the new top case.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

3 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

The main thing is to go slow and use care when handling ribbon cables. They are notoriously fragile and can be easily broken. Good luck with your new top case. Ralph

Was dit antwoord nuttig?

Ja Nee
Score 2

2 opmerkingen:

If it is a Unibody then you have the replace the top case I think. Ralph

door

I think the SR stands for the Santa Rosa processor and the cable link you gave is valid. Bravo +

door

Voeg een opmerking toe

Opties

Surely you can find just the cable. See if you can spot a part number on it.

Was dit antwoord nuttig?

Ja Nee
Score 2

1 Opmerking:

If your MacBook is NOT a unibody then mayer is absolutely correct. Here is the link to the part. + Ralph

MacBook Upper Case Cable

door

Voeg een opmerking toe

Opties

Just another hint: When replacing the topcase, blow out the socket on the logicboard using compressed air, because its easily zapped by statics or shorts.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Zenitar zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,511