my home button has been less responsive even after calibration and cleaning so I suspect that the ribbon cable is to blame. Since it is held on by adhesive and taking the old broken one off would remove said adhesive, do I need to worry about the new cable not adhering, if so what adhesive should I use?
Is dit een goede vraag?
Rep: 2,9k
8
10
5
Any replacement cable worth buying will have the adhesive already on it. Just be sure that you purchase from a good source, such as the one here.
Was dit antwoord nuttig?
Rep: 2k
6
2
1
No, normally the adhesive will come off with the flex.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 192
