Ga door naar hoofdinhoud

Reinstalling the MacBook top case

I need help aligning the clips over the super-drive to install the top case again. I recently cleaned the heatsink and fan, and cant seem to get the top case perfectly attached over the super-drive. It has a very large bulge over it.

Thanks!

P.S: I also redid the thermal paste with Arctic Silver Ceramique, and the idle tempatures went down on the CPU. However, the Chipset seems 1 to 2 degrees higher. Could someone please state their idle temps on their Late 2007 MacBook?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
2 opmerkingen

Have you got all the plastic clips over the superdrive in place and the right way round?

door

What is the correct way? Away from the outside of the mac, or pushed up on the side?

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

The open side points into the machine. If you need a picture you can mail me: info@re-mac.de

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Thanks! I see they must be open and not locked!

door

Voeg een opmerking toe

Voeg je antwoord toe

Zenitar zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 5,038