Ga door naar hoofdinhoud

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Vragen Bekijk alle

part inside iPhone 4

Block Image

While replacing my iphone 4 screen I noticed a small black piece with a groove in it and i dont know where it goes back. It is about one centimeter long and the heighth of a few sheets of paper and it has a groove in it. It appears to fasten on somewhere for possible protection or a spacer and it is rubber. can someone help? Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
3 opmerkingen

Can you take a photo of it and post it here, we should be able to identify it for you then.

door

i cant seem to get a picture uploaded. How do I do that?

door

I uploaded a image but i dont see it on here

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

That is the front screen flex cables bumper cushion. It is not a necessary part, but is designed to protect the cables. It sits at top edge of logic board (with groove holding logic board) under the screen flex cables.

Was dit antwoord nuttig?

Score 2

1 Opmerking:

ok.. thanks alot

door

Voeg een opmerking toe

Voeg je antwoord toe

doug zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 96