Repareer je spullen Gemeenschap Winkel

Repair information and guides for the fifth generation of iPhone. Model: A1387

2192 Vragen Bekijk alle
Vraag afgerond

Opties

Why is my screen blank after power button repair?

Hello!!!

I carried out a power button repair on my iphone to which I thought had been a success. Prior to putting the phone back together the power button was clicking perfectly, after assembling the phone to which I have a sharp eye and nothing was missing or not put back as it should of been but the screen is now not working. The backlight is functioning, and I can hear the power button working etc, but for some reason the screen is not displaying.

Any thoughts or advice would be greatly appreciated.

Regards

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

I'm having exactly the same issue right now. the backlight is coming on but the screen will not.

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

When you installed the new power flex cable did you remove the lcd? If you did not then you likely damaged the lcd cable when you bent it out of the way to remove the screws for the power button. I always remove the lcd when I do this repair. I have never had this issue.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Opties

Thanks Craig, upon installing a new LCD display I've found that in actual fact I must of damaged the digitizer cable. I shall remove the LCD in future!

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 237