Sixth iteration of Apple iPhone, announced on September 12, 2012. Repair of this device is similar to the previous models, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Black or White.

3294 Vragen Bekijk alle

iPhone 5 Front camera dont work after screen replacement

Hi everyone, i did a screen replacement of my iphone 5 but after that the front camera doesn't work anymore, i tried to reseat the connector but steel not working, could i screw up the logic board? help!!!

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

5 Antwoorden

Gekozen oplossing

I have two like this and it is board damage at the very edge of the board.

Was dit antwoord nuttig?

Score 1
Een opmerking toevoegen
Het nuttigste antwoord

you probably damaged the front camera flex cable. they are very fragile, replace and your camera will be fine

iPhone 5 Front-Facing Camera and Sensor Cable Replacement

Was dit antwoord nuttig?

Score 1

Commentaar:

should it matter if the earpiece and the brightness adjuster still working?

door

Een opmerking toevoegen

i bought a replacement camera from ifixit as well and did the replacement, they don't work. the camera when turned on just gives a small glimpse of what it sees and then freezes, do you know what the problem is?

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

It seems you break the cable of front-facing camera. Can you describe more detail about the front -facing camera.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Does the back camera work? Some times if back cameras broke it won't cycle to the front camera

Was dit antwoord nuttig?

Score 0

Commentaar:

Jess do you mean damage around were the camera contacts to the motherboard?

Fire up a few pics and Jesus can compare

door

Yes--there is a row of very tiny SMD components between flex connector and board edge.

The other had damage to another tiny component on the other side of the connector. I will try to post a pic later

door

Een opmerking toevoegen

Voeg je antwoord toe

Jesus Ruiz zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 7

Altijd: 6,662