Repareer je spullen Gemeenschap Winkel

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 Vragen Bekijk alle
Vraag afgerond

Opties

iPad Mini can't get past apple logo after screen repair

I have repaired a few ipad minis and never had problems. This one though, is killing me.

I removed old digitizer, took out old lcd, unplugged battery, but new digitizer back in, put lcd back in, plugged battery back in and went to power up to test.

Apple logo, awesome! but then after several seconds on the logo, it fades out pretty quick and reboots the ipad and does it all over again.

Ive tried other digitizers, i've double checked everything I could, tried restore (error 9), etc. Made sure no debris anywhere inside causing a short.

Any ideas?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0

1 Opmerking:

Tried a new battery just to see.. same result :(

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

I doubt that the digitizer is what is causing the issue. It's likely something else.

The first thing I would do to troubleshoot:

Restore the iPad in iTunes (hopefully you have a backup) you may need to place the iPad in DFU mode to get the restore to work.

Let me know how this goes!

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

Already tried restores as mentioned in both regular and DFU modes, still no luck. Same "fade out" apple image right as it appears to be copying over the files

door

Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 287