Repareer je spullen Gemeenschap Winkel

Guides and repair information for Power Macs (previously known as Power Macintosh) including G3, G4, and G5 models.

447 Vragen Bekijk alle

Opties

Boot Chime, but no video on monitor.

After changing my PRAM battery, the powermac booted up normally showing me a question mark on the screen. Turned it off and turned it on again after a short time, however this time it started up but nothing showed up on the monitor. What could this be ?

Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

The first question mark showed that it could not find a operating system. Either corrupt system folder or a failed hard drive. I would check and reseat the video card. A black screen can also result from a drained battery or improperly installed battery.

Was dit antwoord nuttig?

Ja Nee
Score 2

2 opmerkingen:

Yes that is when i turned off the mac to get an OS to try and install it. Tried reseating the video card but no luck. Tried taking out the PRAM battery and putting it back in but no luck. Before when i had the dead battery, it wasnt doing the chime, but now it is. Could it still be the battery ?

door

Hook up another machine to the monitor and see if it has failed.

door

Voeg een opmerking toe

Voeg je antwoord toe

julianbugejacoster zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 518