Ga door naar hoofdinhoud

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Vragen Bekijk alle

iPhone 4 won't boot after screen fix

Hi

I've replaced the screen on a friends iPhone 4 and it wont boot, everything is plugged in properly all screws are in their proper places, I just took it apart AGAIN, and there is a small metal bracket loose in there.. Does anybody know where this should go (its from under the metal casing over the screen, headphone/sleep wake ribbon connectors).. Link below to photo..

Cheers,

Chris

the bit at the bottom of the pic

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

That metal piece is a ground for your signal it must be reinstalled on top of emi shield before reassembly.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Chris Williams zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 85