Diode or transistor fell off.

Question

MacBook Pro 13" Unibody Early 2011

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

779 Vragen Bekijk alle

Mohammed Afnan @mohammedafnan

Rep: 11

Gepost: 11 sep. 2013

Opties

Diode or transistor fell off.

Hello everyone. Let me start by thanking you for your help in advance.

A friend of mine had opened his MacBook for cleaning, and for some reason the part in the yellow circle had fallen off of the motherboard. Now the laptop doesn't even wanna turn on.

Is there anyway someone can tell us the exact number of that diode/transistor? Or if there is anyway it can be bypassed? A picture would be very helpful. Thanks again.

http://tinypic.com/r/2s7x5dy/5

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 0

3 opmerkingen

Here's a better picture of the logic board where the component came from Image from Logic Board Replacement Guide

11 sep. 2013 door Dan

Mohammed Afnan, by covering up the numbers, you make it difficult to establish exactly what logic board number this is. @Dan, thanks this will help.

11 sep. 2013 door oldturkey03

Thank you, Dan. It's the one around the right top corner of the RAM with number 330

11 sep. 2013 door Mohammed Afnan

Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

Dan @danj

Rep: 478,9k

Self employed contract worker

35

329

970

Gepost: 11 sep. 2013

Opties

Looking at both your image and the IFIXIT image it appears to be an inductor and labeled 330. Looking at the schematic for this system I do find an inductor L7760 10UH-0.55A-330MOHM.

Was dit antwoord nuttig?

Ja Nee

Score -1

4 opmerkingen:

@Dan, 330 is the 3-digit identification on a surface-mount inductor. It means the figure "33"in Henry's and "0" trailing zero's, hence 33UH. The L7760 would bear the marking "100"

11 sep. 2013 door oldturkey03

OT - I just copied it from the schematic as it was presented ;-} My EE schooling years ago taught me all about RTL, DTL & TTL logic. Got into CMOS and early SMD stuff on my own & early employment. Today, I mostly swap parts, as most in-house techs do. At home I'll do some simple stuff with an iron.

12 sep. 2013 door Dan

Dan, no harm no foul. I totally understand what you are saying. all this is just a hobby for me so I try to stay up with all the new developments. Personally I love tubes and "big" components, that small stuff needs all kinds of small tools and meters ;-) expensive hobby.

12 sep. 2013 door oldturkey03

Gentlemen, thank you so much for your help. I've tried to find the same exact inductor with no luck. What are my options (if any)? Thank you.

13 sep. 2013 door Mohammed Afnan

Voeg een opmerking toe

Here's a better picture of the logic board where the component came from Image from Logic Board Replacement Guide — Dan
Mohammed Afnan, by covering up the numbers, you make it difficult to establish exactly what logic board number this is. @Dan, thanks this will help. — oldturkey03
Thank you, Dan. It's the one around the right top corner of the RAM with number 330 — Mohammed Afnan
@Dan, 330 is the 3-digit identification on a surface-mount inductor. It means the figure "33"in Henry's and "0" trailing zero's, hence 33UH. The L7760 would bear the marking "100" — oldturkey03
OT - I just copied it from the schematic as it was presented ;-} My EE schooling years ago taught me all about RTL, DTL & TTL logic. Got into CMOS and early SMD stuff on my own & early employment. Today, I mostly swap parts, as most in-house techs do. At home I'll do some simple stuff with an iron. — Dan
Dan, no harm no foul. I totally understand what you are saying. all this is just a hobby for me so I try to stay up with all the new developments. Personally I love tubes and "big" components, that small stuff needs all kinds of small tools and meters ;-) expensive hobby. — oldturkey03
Gentlemen, thank you so much for your help. I've tried to find the same exact inductor with no luck. What are my options (if any)? Thank you. — Mohammed Afnan

oldturkey03 @oldturkey03 Rep: 781,5k 1,1k 893 2,3k · Answer 1 · 2013-09-11T16:22:42-07:00

Het nuttigste antwoord

oldturkey03 @oldturkey03

Rep: 781,5k

1,1k

893

2,3k

Gepost: 11 sep. 2013

Opties

Mohammed Afnan, that is reference designator L6995. It is a series D52LC-SM 33UH 20% 0.44A 0.455OHM fixed inductor. Check Jameco.com, Mouser.com or Digikey.com and others for availability.

Was dit antwoord nuttig?

Ja Nee

Score 2

4 opmerkingen:

Thank you oldturkey03 & Dan for taking the the time to look at the images. Where can i find this inductor 330? Or is there anyway i can bypass it? Or any workaround in order for us to get the laptop going? Thanks.

11 sep. 2013 door Mohammed Afnan

You can not bypass this. it is a "critical" component. Try the above links or any other online electronics place. Depends on where you are located.

11 sep. 2013 door oldturkey03

Check on here http://uk.mouser.com/Passive-Components/... something like this should work or any of these. Just match the package size closely.

13 sep. 2013 door oldturkey03

Thank you both for your help. My friend had placed the order last night, and I'll let you know the results.

14 sep. 2013 door Mohammed Afnan

Voeg een opmerking toe